Sample Preparation Procedure Metadata

Activation Laboratories Limited, Ancaster, Ontario / Rock crushing



Procedure Description

Laboratory: Activation Laboratories Limited, Ancaster, Ontario

Method: Rock crushing

ActLabs RX2

Crush, split and pulverize with mild steel (best for low contamination) of sample, and mechanical split to obtain a representative sample, a portion of which is further pulverized.

The entire sample is crushed to a nominal minus 10 mesh (1.7 mm), mechanically split (riffle) to obtain a representative sample and then pulverised to at least 95% minus 150 mesh (105 microns).  Mild steel mills are used to avoid Cr or Ni contamination.  Contamination with Fe (up to 0.2%) is possible.

[Description taken from ActLabs 2011 Canadian Schedule of Services and Fees]

Sample Classification (Preparation)

IndexSample CountSurveySample BundleSample TypePrep Lab MaterialDuplicates count
89  220003220001 Whole Rock crushing
Date modified: